page_banner

news

Galvanized steel wire (galvanized steel wire) use: mainly used for planting greenhouses, farms, cotton baling, springs and wire rope manufacturing.

Galvanized steel wire is made by drawing high-quality carbon structural steel such as 45#, 65#, 70#, and then galvanizing (electro-galvanizing or hot-dip galvanizing).
Physical properties: The surface of galvanized steel wire is smooth, smooth, without cracks, knots, thorns, scars and rust. The galvanized layer is uniform, strong adhesion, durable corrosion resistance, excellent toughness and elasticity. The tensile strength should be between 900Mpa-2200Mpa (wire diameter Φ0.2mm-Φ4.4mm). The number of torsion (Φ0.5mm) should be more than 20 times, and the repeated bending should be more than 13 times.

The use of galvanized steel wire mesh-dedicated to building exterior insulation
The hot-dip galvanized steel wire mesh is made of high-quality steel wire according to the national standard steel and processed by precise automatic mechanical technology. The mesh surface is flat, the structure is firm, and the integrity is strong. Even if it is partially cut or partially subjected to pressure, it will not be loosened. It will be carried out after forming. Galvanizing (hot-dip galvanizing) has good corrosion resistance and has the advantages that ordinary wire mesh does not have.

To obtain better thermal insulation function, the quality of steel wire mesh must be strictly controlled to achieve the desired effect.
1: Hot-dip galvanized steel wire mesh diameter should be 12.7*12.7mm, wire diameter should be 0.9mm
2: Hot-dip galvanized steel wire (galvanized steel wire) mesh fixing method: the steel mesh is fixed with plastic expansion bolts. When fixing the steel mesh, the steel mesh should be nailed and hung along the corners from the top layer. The steel wire mesh should be laid horizontally or vertically according to the size of the split seam. When nailing the wire mesh, first disassemble one end of the wire mesh (at a distance of 50 mm) into an L angle to facilitate turning and overlapping. Use a steel wire with a diameter of not less than 1.5 mm to make a V-shaped clip, first fix the steel wire mesh, and then punch or inject the anchors according to the plum shape.
3  After the steel wire mesh is fixed, first use the anti-cracking mortar to scrape the roughness of 2-3 mm, so that the steel wire mesh is pressed into it. After solidification, apply 3-5 mm. After the anti-cracking mortar reaches a certain strength, the tile bonding layer can be applied. Construction and veneer tiles.


Post time: Dec-11-2021